Advertisement
aSSEMBLY
1
Clear a space large enough for the assembled
product. It is recommended to assemble on a soft
surface such as a carpet or blanket. Unless otherwise
indicated, do not fully tighten bolts until all parts are
in place.
Lay out the four Wall Panels
K
A
the allen Key
, join
and
H
J
Bolts
and Washers
panels by the same process until all four wall panels
are fastened together.
hardware used: 8x M6x35 Bolts
2
Turn the entire box upside-down on a protected
surface. Fit the Bottom Panel
base of the box. Using the allen Key
place using four M6x35 Bolts
as shown. Fully tighten these bolts.
hardware used: 4x M6x35 Bolts
Contact us for assistance: (866) 985-7877 | www.wtliving.com
A B C D
. Using
D
using two M6x35
as shown. Continue to join
8x Washers
F
into the open
K
, fasten in
H
J
and Washers
4x Washers
J
H
K
1
J
H
K
2
4
Advertisement
