Download
Share
Print this page
  1. Manuals
  2. Brands
  3. O'Fresh Manuals
  4. Fan
  5. 171
  6. Owner's manual

O'Fresh 171 Owner's Manual

Misting fan
Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
www.ofresh.fr
Owner's Manual Misting Fan ref 171

Advertisement

loading

Related Manuals for O'Fresh 171

Summary of Contents for O'Fresh 171

  • Page 1 Owner’s Manual Misting Fan ref 171...
  • Page 2 IMPORTANT SAFETY INFORMATION: Please carefully read this manual before attempting to install or use this misting fan. For your safety, comply with all safety instructions and warnings contained in this owner’s manual to prevent personal injury or property damage. Important Safety Information These instructions are not meant to cover every possible condition and situation that may occur.Please read all instructions before using this misting fan.Failure to carefully read all instructions may result in possible electric shock or fire hazard, and will void...

  • Page 3: Wiring Diagram

    uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and sollection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
  • Page 4 Note：No further notice if above parameters change. Operating Instructions 1. Fan oscillation angle is 90° from left to right. 2. Fan up and down angle is 10°. Adjust method: Loosen the fixation nut, adjust the motor to desired angle, and fasten the nut. 3.
  • Page 5 Assembly Instructions DO NOT plug in the fan before assembly. Carefully remove all packaging materials, make sure there is no residual foam left in any of the components. Carefully check all components, make sure there is neither shortage nor damage during transportation. Step 1: Assembling the stand pole a.Remove the water tank.
  • Page 6 3.Assembling the Connection Tube a. Refer to diagram 3. Insert the connection tube into the top of the stand pole, and fasten with two M6X10 bolts. 4. Settling the Water Tank a. Place the water tank in its original position on the frame. b.
  • Page 7 5. Assembling the Fan Head a. Place the fan head on the top of the connection tube, and tighten the M6 injection screw on the upper joint. b. Loosen the ST3.8 self-tapping screw on the front lid of the water collection plate decoration cover.
  • Page 8 the tank covers check if it is working normally. c. Press MIST button to start the misting function, check if the misting motor, misting plate and water pumps is working normally. d. Turn the ball valve knob from OFF to ON, observe if the misting changes. f.
  • Page 9 1.Safety Guard 2.Misting Plate 3.Water Outlet 4.Water Gathering Plate 5.Misting Motor 6.Water Collection Plate 7.Front Lid of Water Collection Plate Decoration Cover 8.Rear Lid of Water Collection Plate Decoration Cover 9.Front Grill 10.Net Ring 11.Rear Grill 12.Blade 13.Front Lid of Motor Cover 14.Fan Motor 15.Motor Back Cover 16.Supporter...