Advertisement
3. Standard Clamping by Turning the Spindle
By turning the spindle (3) clockwise (CW) the vice clamp. By turning the spindle (3) counter
clockwise (CCW) the vice disengage.
4. General Instructions
The wood vice is mounted to the lateral face of a workbench flush with the outside edge. The
exact position is selected depending on the design of the workbench and HV vice size. Is
recommended vice installation on workbench with collar. The most common HV vice installation is
illustrated in Fig. 2a, 2b, 2c.
Cover vice installation on workbench
Workbench
collar
Spacer underneath
the cover
HV 519 a 519S
HV 581
Cover vice
min A
min B
mm ["]
mm ["]
5
395 [15,551"]
[0,197"]
5
348 [13,701"]
[0,197"]
Page 2 (of 7)
Workbench board, min.
thickness 100mm [3,937"]
Clamping jaw with
of the conduit
cassette
C
mm ["]
88 [3,465"]
88 [3,465"]
Spacer
underneath the
cover vice
Fig. 2a
Advertisement
