Philips TSU9200/79 Starter Manual page 5

The Pronto System
The Pronto System contains a variety of equipment that is connected and configured to
interact with each other. The scheme below shows a possible connection with several
A/V devices.
To set up a Pronto System and configure the Remote Control as the central unit of
the system, you need different components. The scheme below indicates the different
components, their significance in the configuration of the Pronto system and their
mutual connection.
USB
TSU9200
More information is available:
• In the Configuration Program's Online Help:
• On how to set up the Remote Control.
• On how to incorporate Extenders in the setup.
• In the Starter's Guides for the PCX9200 and RFX9200 Extenders:
• On how to configure and install an Extender in the Pronto System.
D Note
The PCX9200 and the RFX9200 Extenders are optional accessories.
Before You Start
IR
RFX9200
PCX9200
IR
A/V equipment
USB
5