Installing The Home Connect Software Update; Resetting Home Connect Set- Tings; Data Protection - Siemens KI81FH Series User Manual

Follow the instructions in the
4.
Home Connect app until the pro-
cess is complete.
a Once successfully connected, the
temperature display shows
If the temperature display shows
5.
, the appliance was able to es-
tablish a connection to the
Home Connect app.
In the Home Connect app,
‒
check whether the mobile
device is connected to the
WLAN home network (Wi-Fi).
Repeat the process.
‒
If the temperature display shows
6.
, reset the Home Connect set-
tings.
→ "Resetting Home Connect set-
tings", Page 21
Installing the Home Connect
software update
The appliance searches for updates
to the Home Connect software at reg-
ular intervals.
Note: If updates are available, the
temperature display shows
To reset the update and the temper-
ature display to the set temperature,
press any touch field.
Press .
1.
a The temperature display shows
Press repeatedly until the tem-
2.
perature display shows
Press .
3.
a The temperature display shows an
animation.
a The update is installed.
a The controls are locked during the
installation.
a If the installation is successful, the
temperature display shows
If the temperature display shows
4.
, the appliance was unable to in-
stall the update.
5.
.
Resetting Home Connect set-
tings
If your appliance experiences con-
nection problems with the WLAN
home network (Wi-Fi) or your appli-
ance wants to log into a different
WLAN home network (Wi-Fi), you can
reset the Home Connect settings.
1.
a The temperature display shows
2.
3.
a The temperature display shows an
a The temperature display then
a The Home Connect settings have

Data protection

.
Please see the information on data
protection.
The first time your appliance is
registered on a home network
.
connected to the Internet, your
appliance will transmit the following
types of data to the Home Connect
.
server (initial registration):
¡ Unique appliance identification
¡ Security certificate of the Wi-Fi
.
¡ The current software and hardware
Repeat the process at a later
‒
point.
If the update cannot be completed
after several attempts, contact the
After-sales service → Page 30.
Press .
Press repeatedly until the tem-
perature display shows
Press .
animation for 15 seconds.
shows .
been reset.
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).
communication module (to ensure
a secure data connection).
version of your appliance.
Home Connect en
.
.
21