Front Panel Controls - Inter-m VAMS-0808 Operating Manual

Front Panel Controls

Front Panel Controls
VAMS 0808
1
OUTPUT
8
7
1. POWER SWITCH
Power ON/OFF switch.
2. OUTPUT SELECT SWITCH
Selects output channel. When this button is pressed, the status of the selected channel is blinked. During
the blinking select any input channels, then the status of display is changed as the selected input channel
and the blinking is stopped. If the selection doesn't exist for 10 seconds approximately, the selection is
cancelled.
3. INPUT SELECT SWITCH
Represents the selected input channel to each output channel.
4. ALL SWITCH
Selects all output channels. Press this button, and the status display of all channels are blinked. If the
selection doesn't exist for 10 seconds approximately, the selection is cancelled. This function is very
useful when one input is displayed to all outputs or when user wants to disconnect all outputs.
5. OFF SWITCH
This button disconnects an output channel. If user press this button after select the OUTPUT SELECTING
BUTTON, the selected status display indicate "0" and the output is nothing.
6. LOCK SWITCH
Switch for protecting a configuration from mishanding. After the setting is completed, press this button 5
times then the light of this switch is blinked and all buttons can't be controlled.
If user want to cancel this function, just press this button 5 times then the light is off.
Lock function isn't cancelled even if this machine is on and off.
7. STATUS DISPLAY (VIDEO)
Displays the video configuration. The figure of status display represents which video inputs are trans-
ferred to video output terminals.
"1~8" indicate each channel and "0" means non output.
VIDEO AUDIO MATRIX SWITCHER
VIDEO INPUT
OUTPUT
2 3 4 5 6 7 8
INPUT
AUDIO INPUT
4
VIDEO AUDIO MATRIX SWITCHER
1 2 3 4 5 6 7 8
ALL OFF A/V VIDEO AUDIO LOCK
5
9
1
POWER
ON
OFF
6 3 2
3
VAMS-0808