Selecting The Right Vcr Or Dvd Functions - Philips SRP620/10 Instructions For Use Manual

Philips remote control srp620

Hide thumbs

Table of Contents

Available languages

SBC_SRP620_v2.qxd 26-04-2005 14:58 Pagina 7

TV is not responding to any key

If your TV is purchased after 1999, it is possible that it uses

the new RC6 remote control code.

Solution:

The Active control, smart sound and smart

picture keys are not working

In some TV sets are different commands used.

Solution:

The Active control key is not working

In some TV sets a different command is used for this

function.

Solution:

The Smart sound and Smart picture keys are

not working

In some TV sets are different commands used for these

functions

Solution:

If you select the DVD/VCR function, the remote is set for

DVD-player functions. Please read the steps below if you want

to select VCR or DVD-recorder functions.

Setup VCR functions

If you want to operate a Philips videocassette recorder do the

following:

- You cannot operate the DVD functions anymore.

Instructions for use

• Make sure the batteries are inserted as indicated in

chapter 1.

• Make sure the remote control is in TV mode

(both Mode lights must be out).

• Press and hold the OK button and digit 3 simultaneously

for 5 seconds till the mode lights blink twice.

• Make sure the remote control is in TV mode

(both Mode lights must be out).

• Press and hold the OK button and digit 5 simultaneously

for 5 seconds till the mode lights blink twice.

• Make sure the remote control is in TV mode

(both Mode lights must be out).

• Press and hold the OK button and digit 4 simultaneously

for 5 seconds till the mode lights blink twice.

• Make sure the remote control is in TV mode

(both Mode lights must be out).

• Press and hold the OK button and digit 8 simultaneously

for 5 seconds till the mode lights blink twice.