Advertisement
4.
Control panel
Control panel
Control panel
trol panel
5.
Control panel
Control panel
Control panel
panel
ol panel
6.
7.
Control panel
Control panel
8.
Display panel
Display panel
play panel
Display panel
Display panel
14064_DHCER20FE Manual_V2.indd 7
d) Fan: turned on.
e) Temperature setting: the default temperature setting is 25ºC.
f) Fireplace display: turned on,
g) ECO: turned off,
In heating mode, press
a)
Low power:
b)
High power:
In heating mode, press
quit this mode.
Control panel
a)
ECO mode: the default temperature setting is 22ºC. When the room
temperature is lower than 18ºC, the machine works in high power: when
the room temperature is between 18ºC and 22ºC the machine works in low
power. When the room temperature is above 22ºC the heating element will
turn off.
b)
When the ECO function is operating, the
c)
When the room temperature is above 22ºC the heater and oscillation function
will also be turned off.
In heating mode, press
up/off accordingly.
In heating mode, press
a)
Timer: press
key to set the timer (within a range of 0-24 hours), the timer will increase or
decrease by 1hr increments.
b)
Entering the timer mode by pressing
the timer settings. But you can set the timer by pressing the +/- key. After no
operation for 5 seconds, the time that you have set will be saved.
c)
When the timer turns to the value "0", the device will then turn off and enter
into standby mode.
d)
If the timer is set as "0", it means that no timer is set.
In heating mode, press
a)
Temperature setting function: press
SETºC will display, press +/- key to set the temperature. The range of the
temperature is from 15°C to 35°C, and can increase or decrease by 1°C
increments.
b)
Entering into the temperature settings by pressing
Display panel
does not change the temperature settings. You can set the temperature by
pressing +/- key. After no operation for 5 seconds, the temperature that you
have set will be saved.
lights up.
lights off.
to shift the power between low and high power level.
lights up.
lights up.
to enter ECO mode,
to turn on/off the oscillation function,
or
button to set the timer.
or
key,
or
button to set the temperature.
lights up, press it again to
button is not active.
will light
and
will display, press +/-
or
does not change
or
key,
and
or
keys
– 7 –
7/12/17 4:25 PM
Advertisement
