Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Hyco Sapphire SAPUC1
Summary of Contents for Hyco Sapphire SAPUC1
- Page 1 Product Instruction Manual Sapphire SAPUC1 Undersink chiller V19,1.3...
- Page 2 Thank you for purchasing a Hyco Sapphire water chiller. This discrete undersink chiller is designed to be used with a counter-mounted tap and filter (not included) to provide instant high quality chilled drinking water. This appliance is intended to be used in households and applications such as: •...
- Page 3 Disconnect the unit from power source before removing panels for maintenance. Before first use and after a long period of no use, the water tank and pipes should be sanitised. Do not install in environments where ambient temperatures are < 10 C or >...
- Page 4 Electrical connection Do not connect the electrical supply until the commissioning has been completed. Connect the kettle style lead to corresponding socket located at the rear of the appliance before plugging the other end into an electrical socket. Ventilation Depending on the installation environment and usage of the product appropriate ventilation may need to be provided in the cupboard housing the chiller such as door spacers or air vents.
- Page 5 4. Maintenance Draining the unit It is recommended the unit is sanitised every 3 - 6 months. Before undertaking maintenance ensure the appliance is isolated from the electrical supply. • Unplug the power cable from the electrical outlet. • Isolate the water supply to the chiller and remove ¼” pipe from the “Water In” & “Water out”...
-
Page 6: Specifications
5. Specifications SAPUC1 Supply 230V AC 50Hz Power 200W Class IP rating 20L/H < 10°C Cooling capacity Immediate draw off 3 litres Minimum supply pressure 0.1 MPa 0.3 MPa* Maximum supply pressure ¼” push fit Connections Inlet/Outlet Refrigerant R134a/110g Operating ambient (min/max) C –... - Page 7 6. Guarantee and service policy This product is covered by a standard parts or replacement warranty for a period of two years from the date of purchase. If there is a manufacturing defect within the warranty period we will send spare parts, repair and return the unit or, at our discretion, supply a replacement product.
- Page 8 In order to underline the duty to dispose of this equipment separately, the product is marked with a crossed out dustbin. Hyco Manufacturing Ltd Normandy Court Express Way...
Need help?
Do you have a question about the Sapphire SAPUC1 and is the answer not in the manual?
Questions and answers