Philips SBCHD1500U/05 Instructions For Use Manual page 12

12 ENGLISH
Option 2: Coaxial Digital connections (also referred
to as S/PDIF)
Connecting the digital wireless base station to:
– CD/ DVD player
– Stereo amplifier
Note: Some amplifiers do not have Dolby® Digital and DTS® capability on their
Digital or S/PDIF output
1 Connect one side of the S/PDIF digital audio cable (included) to the
S/PDIF output of the audio source and the other side to the S/PDIF input
(Digital 1 -IN) of the base station.
2 (Optional) Take the S/PDIF cable that most likely came with your audio
source. Connect one side of this 2nd S/PDIF digital audio cable (not
included) to the S/PDIF input of your amplifier or home cinema receiver
and the other side to the S/PDIF output (Digital 1 - OUT) of the base
station. When connecting your audio equipment in this way, you will be able
to benefit from the Automatic Audio Signal Routing (AASR) feature. For
graphical illustration, please refer to the Quick Startup / Reference Guide.
For benefits of AASR, please refer to glossary.
IMPORTANT!
• In case of connecting an audio CD player to the HD1500U base station
making use of the CD player's digital outputs, do not up sample the
Audio CD digital output signal higher than 44.1 kHz.
• When connecting a DVD player to the HD1500U base station making
use of the DVD player's digital output, do not up sample the DVD digital
output signal higher than 48 kHz.