Clas Ohlson 36-2528 Instruction Manual

LED Strip
Article no. 36-2528 & 36-2529
Please read the entire instruction manual before using and
save it for future use. We apologise for any text or photo
errors and any changes of technical data. If you have any
questions concerning technical problems please contact our
Customer Service Department

Product description

LED strip with 15 diodes for decorative lighting; for example,
behind the television, under shelving etc. The diodes are
attached to the fl at bottom with adhesive tape or screws
(included).
- Length: 30 cm
- Suitable AC/DC adaptor 36-2524
- 2 different colours:
Blue LED (36-2528)
White LED (36-2529)
Delivered with:
- 1 LED strip
- 1 fl exible extension plug (facilitates connection
of several fi ttings)
- 3 holder
- 1 cable
- 3 double-sided tape
- 1 end peace
Safety
- The fi tting is only intended for indoor use.
- Do not use the fi tting if the mains or adaptor are
damaged.
- Never disassemble the fi tting as it does not contain any
reparable parts.
- Never look directly into the light source, it may cause
damage to your eyes!
- Never expose fi tting to moisture or wetness.
GREAT BRITAIN For consumer contact, please visit www.clasohlson.co.uk and click on customer service.
ENGLISH
Mounting
The fi tting can be connected to several fi ttings in various
combinations. See image for suggestions.
Mounting with double-sided tape
1. Select area for mounting and wipe grease stains from
surfaces.
2. Remove protective paper from double-sided tape and
place on the fi tting.
3. Attach fi tting to selected area.
4. Connect lamp cable to the fi tting and then to the AC/DC
adaptor. (suitable adaptor 36-2524).
5. Place plug in wall-socket and turn on lamps with cable
circuit breaker.
Mounting with screws
1. Measure and mark where holders will be placed.
2. Mount holder with screws supplied.
3. Secure fi tting in the holder according to image.
4. Connect lamp sockets to the AC/DC adaptor.
5. Connect lamp cable to the fi tting and then to the AC/DC
adaptor. (suitable adaptor 36-2524)
6. Place plug in wall-socket and switch lamps on with cable
circuit breaker.
Note!
Make sure contact surfaces are placed in right direction
when extending the fittings!

Care and maintenance

- Disconnect from mains before cleaning.
- Use a soft damp cloth. Never use detergents or strong
solvents.
Disposal
When you come to dispose of the product you should follow
local regulations. If you unsure as to how to proceed, get in
touch with your local council/municipality.