QUAD Vena II User Manual page 12

Playing Music via USB input
Connect a Mac or PC via the B-type USB interface on Vena's rear panel. Press USB button on the front panel. USB indicator will
be lit, and then click Play on your music player software to play audio files stored on your computer.
Playing Music via Bluetooth
You can wirelessly connect Vena II to a music source via Bluetooth wireless technology. Volume up/down, standby and mute in/out
can be controlled from either your Bluetooth source or from Vena II. Other functions-play, pause, previous track, next track, fast
forward and reverse are all controlled from your Bluetooth source only.
Establishing a Bluetooth Connection
1. Place Vena II and a Bluetooth music source within a few meters of each other.
2. Power on Vena II and select Bluetooth as the source. The Bluetooth source indicator will flash when in pairing mode.
3. Activate the Bluetooth function on your music source.
4. Select "Quad Vena II" when Vena II is found to start the pairing process.
5. If prompted for a password, enter "0000".
To play music
Select Vena II as a music output device on your Bluetooth source to start playing music.
Dsiconnecting Bluetooth Connection
To disconnect the Bluetooth music source either:
Move the Bluetooth source beyond the communication area
Turn off the connected device or turn off its Bluetooth function
Note:
If you have difficulty connecting Vena II to a Bluetooth device, please try selecting "Forget this Device" on your source unit and
then go through the connection procedure again.
12