Advertisement
INSTALLATION INSTRUCTIONS
Slide the hood mounting adapter and the overflow
back plate to the head of the flat head screw.
Insert the right end of the overflow bracket into the
tub overflow hole. Slide the entire assembly to the
right until the left end of the overflow bracket can
be inserted into the tub overflow hole.
Center the overflow back plate within the tub
overflow hole.
Hold the overflow bracket in place so it doesn't
turn. Tighten the flat head screw with a
screwdriver.
Position the overflow hood over the hood mounting
adapter, making sure the "KALLISTA" logo is level.
Tighten the two set screws (installed in hood) with
the hex wrench.
1080618-2-A
Page 2 of 2
1. INSTALL OVERFLOW HOOD (cont'd.)
Hood Mounting
Adapter
Flat Head
Screw
Overflow Hood
Loft Overflow Port Hood
Tub Overflow Hole
Overflow Back Plate
Hood Mounting
Adapter
Questions? Problems? For additional assistance, please contact Kallista's Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.
P21580
Overflow Bracket
Set Screws
(installed
in hood)
Advertisement
