INSTALLATION INSTRUCTIONS
We appreciate your commitment to Kallista quality products. Please take a moment to review this manual before
you install your Kallista product. If you encounter any installation or performance problems, please do not
hesitate to contact us at the phone number listed at the bottom of the page.
Prior to installation, unpack the overflow hood and inspect it for damage. If the product is damaged, please
contact Kallista immediately at the phone number listed at the bottom of the page.
Observe all local plumbing and building codes.
If possible, install the overflow hood to the bathtub before installing the bathtub.
Kallista reserves the right to make revisions in the design of plumbing products without notice, as specified in
the Price Book.
Loosely assemble the flat head screw, hood mounting
adapter, overflow back plate, and overflow bracket, as
shown.
Be sure that the flat head screw protrudes approxi-
mately 3/16" from the back of the overflow bracket.
1080618-2-A
Page 1 of 2
THANK YOU FOR CHOOSING KALLISTA
BEFORE YOU BEGIN
TOOLS AND MATERIALS
Hex Wrench
(Provided)
1. INSTALL OVERFLOW HOOD
Loft Overflow Port Hood
Phillips
Screwdriver
Overflow Bracket
Hood Mounting
Adapter
Flat Head
Screw
Questions? Problems? For additional assistance, please contact Kallista's Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.
P21580
Overflow Back Plate