LG Magic Remote Owner's Manual page 13

Battery
1. Installing Batteries
Please read this manual carefully.
Press the top of the battery cover, slide it back, and lift the
cover as shown below.
To replace batteries, open the battery cover, replace alkaline
batteries (1.5 V, AA) matching
inside the compartment, and close the battery cover. Be sure
to point the remote control at the remote control sensor on
the TV.
To remove the batteries, perform the installation actions in
reverse. Don't mix old or used batteries with new ones. Close
the cover securely.
Open the battery cover to find the label.
2. Precautions
After replacement of the batteries, pair the remote control and use it in accordance with user manual.
If the unit does not operate after replacement of batteries, reattempt pairing in accordance with the user manual.
If the remote controller is not being used for prolonged period of time, remove the batteries from the unit.
Do not dismantle or expose the batteries to heat.
Do not drop or exert extreme impact on the batteries. This may cause the case to be damaged.
Do not immerse the batteries in water.
There is danger of explosion if batteries are inserted incorrectly.
Properly dispose of used batteries.
Failure to match the correct polarities of the battery may cause the battery to burst or leak, resulting in fire,
personal injury, or ambient pollution.
and ends to the label
3