SPL 1090 Manual

24/192 ad converter

Advertisement

Quick Links

Manual
24/192 AD Converter
Model 1090
Internal, dual-channel AD converter module for SPL units

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1090 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for SPL 1090

  • Page 1 Manual 24/192 AD Converter Model 1090 Internal, dual-channel AD converter module for SPL units...
  • Page 2 This document is the property of SPL and may not be copied or reproduced in any manner, in part or fully, without prior authorization by SPL.
  • Page 3: Table Of Contents

    Content Safety instructions Product features Scope of delivery Installation General Instructions, Adaptor plate Step-by-step Connections & Operation SYNC INPUT, Sample Rate Double S/P-DIF output RCA and optical, Additional input with single-channel devices Technical Specifications Your Notes 24/192 AD Converter 1090...
  • Page 4: Safety Instructions

    • When installing the converter, carefully follow the instruc- tions beginning on page 5. If you are uncertain, please ask a qualified technician or your SPL dealer for assistance. Product Features The Analog/Digital Converter Module 1090 is an optional digital output for compatible SPL units with a plug-and- play design for easy installation.
  • Page 5: Scope Of Delivery

    • Manual Installation General Instructions/Adaptor Plate The AD Converter Module 1090 is designed strictly as an option for compatible SPL devices. If you are not a techni- cian or do not have sufficient experience with electronic repairs or modifications, we highly recommend that you ask a technician or your SPL dealer for assistance.
  • Page 6 Remove the screws and then the cover of the option slot on the device‘s rear panel. Sockel Step 2: Remove the strap holding the cable from the inside of the slot cover. You may have to (carefully) cut through the silicone drop. Sockel Stecker 24/192 AD Converter 1090...
  • Page 7: Step-By-Step

    Step 4: Without turning it, insert the module into the device (circuit board upwards) and fasten it using the screws from the optional slot cover. Your new converter module is now ready for operation. 24/192 AD Converter 1090...
  • Page 8: Connections & Operation

    SYNC INPUT. The sync signal is always present, also if no audio signal is present at the S/P-DIF output. The 1090 is not equipped to accept Word Clock for synchro- nization. If a valid signal is present, the converter automatically conforms to the sample rate received at the SYNC input.
  • Page 9: Double S/P-Dif Output Rca And Optical

    (some consumer units for example do not). Additional input with single-channel devices If the AD Converter Module 1090 is installed in a single- channel SPL device such as the GainStation 1, Frontliner, Channel One or Track One, the second channel of the stereo converter can be used via the additional analog AD converter input on the device‘s rear panel.
  • Page 10: Technical Specifications

    Power consumption +15 V: max. 115 mA Power consumption -15 V: max. 17 mA Dimensions (W x H x D): 100 x 27 x 76 mm (3.94 x 1.06 x 3 in.) Weight: 68 g (2.39 oz.) 24/192 AD Converter 1090...
  • Page 11: Your Notes

    ............. 24/192 AD Converter 1090...
  • Page 12 < Manual 24/192 AD Converter Model 1090 24/192 AD Converter 1090...

Table of Contents