Advertisement
Observation System
The illustrations to which this manual
refers are shown on the front cover flap.
Table of contents
Introduction............................................................................................... 2
Installation.................................................................................................. 3
Monitor
Cameras
VCR
Extra monitor
Alarm contact
Cable
Operation.................................................................................................... 4
Monitor
System on/off
Power save
Brightness/Contrast
Volume
Talk
Action
Auto sequence
Camera selection
VCR
Next camera input
Doorbell
Alarm
Alarm programming
Automatic alarm termination
Premature alarm termination
Alarm priority
Tips for maintenance......................................................................... 5
English
Read these instructions, before putting your system in
operation.
2
Introduction
By purchasing this system you possess a sophisticated,
easy-to-operate observation system.
The observation system consists of a specially designed
monochrome monitor with a number of observation
and security functions, including:
Reproduction of image and sound picked-up by the
camera (can be extended by an intercom). The reproduced
images and sound can be recorded by means of a video
recorder.
Monitoring of the camera lines for breakage in the cable.
Page
Alarm detection by means of an alarm box (optional) or
by the alarm contacts on the camera.
Triggering external equipment by means of an action
box (optional) and/or alarm.
When the picture and sound are switched off by means
of the power save switch on the control panel of the
monitor, the cameras continue to transmit images and
sound to the VCR and slave output. The alarm
functions also remain active.
In addition, several CCD cameras and accessories can be
connected to the monitor by means of a four-wire
(telephone) system cable.
Accessories:
The system can be extended by one or more system
accessories or other peripheral equipment, such as:
Intercom box
Alarm box
Action box
Cameras (a maximum of four)
Cable extension adapter
Camera interface box
Slave monitor
Video printers
etc.
Mains supply:
The monitor can be connected to a power voltage of
100-240 V ~ 50/60 Hz. The safe low-voltage (24 V
the camera(s) and the system accessory boxes is supplied
by the monitor through the system cable.
) for
Advertisement
