Advertisement
B/W Observation Quad
The illustrations to which this manual
refers are shown on the front cover flap.
Table of contents
Introduction............................................................................................... 2
Installation.................................................................................................. 3
Monitor
Cameras
VCR
Extra monitor
Alarm contact
Cable
Operation.................................................................................................... 4
Monitor
System on/off
Power save/active
Normal mode
Silent mode
Brightness/Contrast
Volume
Talk function
Doorbell function
Action function
View modes
Full screen mode
Camera sequence mode
Quad mode
VCR mode
Clock adjust function
Display time and date (on/off)
Time and date adjustment
Event replay function
Next camera input
Alarm
Alarm programming
Automatic alarm termination
Premature alarm termination
Alarm priority
Tips for maintenance......................................................................... 5
Read these instructions, before putting your system in
operation.
2
Introduction
By purchasing this system you possess a sophisticated,
easy-to-operate observation system.
The observation system consists of a specially designed
monochrome monitor with a number of observation
and security functions, including:
Reproduction of image and sound picked-up by the
camera (can be extended by an intercom). The
reproduced images and sound can be recorded by means
of a video recorder.
Quad mode feature displays images of up to 4 cameras
Page
in 4 quadrants on the monitor screen.
Event replay function to store and replay the images of
an alarm, a doorbell or a lost camera.
Monitoring of the camera lines for breakage in the cable.
Alarm detection by means of an alarm box (optional) or
by the alarm contacts on the camera.
Triggering external equipment by means of an action
box (optional) and/or alarm.
On Screen Display (OSD) to show time, date, camera
number and alarm information on screen or on video
tape.
When the picture and sound are switched off by means
of the power save switch on the control panel of the
monitor, the cameras continue to transmit images and
sound to the VCR and slave output. The alarm
functions also remain active.
In addition, several CCD cameras and accessories can be
connected to the monitor by means of a four-wire
(telephone) system cable.
Accessories:
The system can be extended by one or more system
accessories or other peripheral equipment, such as:
Intercom box
Alarm box
Action box
Cameras (a maximum of four)
Cable extension adapter
Camera interface box
Slave monitor
Video printers
Mains supply:
The monitor can be connected to a power voltage of
100-240 V ~ 50/60 Hz. The safe low-voltage (24 V
the camera(s) and the system accessory boxes is supplied
by the monitor through the system cable.
) for
Advertisement
