TABLE OF CONTENTS
1 UNPACKING................................................................5
2 SERVICE ........................................................................5
3 DESCRIPTION .............................................................5
4 INSTALLATION ..........................................................5
4.1 Power..............................................................................................5
4.2 Mounting ........................................................................................5
4.4 Monitor Output ...........................................................................6
4.8 Dwell Time ....................................................................................7
4.11 Alarm Capture ...........................................................................8
4.15 Status Line ...................................................................................9
5 OPERATION ..............................................................10
5.1 DWELL Key ............................................................................... 10
5.2 SKIP/clr Key................................................................................ 10
5.3 ALARM Key................................................................................ 10
5.4 RUN/next Key........................................................................... 10
7 FONT TABLES...........................................................16
1
UNPACKING
Unpack carefully. This is electronic equipment and should be
handled with care.
Check for the following items:
Verify the unit model number.
One (1) cable assembly with 15-pin connector.
If an item appears to have been damaged in shipment,
replace it properly in its carton and notify the shipper. If any
items are missing, notify your Philips Communication &
Security Systems Inc. Sales Representative or Customer
Service.
The shipping carton is the safest container in which the unit
may be transported. Save it for possible future use.
2
SERVICE
If the unit ever needs repair service, the customer should
contact the nearest Philips Communication & Security
Systems Inc. Service Center for authorization to return and
shipping instructions.
Service Centers
U.S.A. & Canada: 800-366-2283
Mexico & Central America: 52-5-564-2726
Europe & Middle East: 44-1932-765666
South America: 54-1-956-0837
Australia: 61-2-888-9000
New Zealand: 64-4-237-7297
OBSERVE PRECAUTIONS
WARNING: Electrostatic-sensitive device. Use
proper CMOS/MOSFET handling precautions to
avoid electrostatic discharge.
NOTE: Grounded wrist straps must be worn and
proper ESD safety precautions observed when
handling the electrostatic-sensitive printed circuit
boards.
3
DESCRIPTION
The LTC 5104 Series and LTC 5108 Series are automatic
sequential video switchers. The LTC 5104 Series have 4-
camera inputs and 1-monitor output; the LTC 5108 Series
have 8-camera inputs and 2-monitor outputs.
4
INSTALLATION
4.1
Power
Model
Rated
1
No.
Voltage
LTC 5104/60
120 VAC, 50/60 Hz
LTC 5104/50
220-240 VAC, 50/60 Hz
LTC 5108/60
120 VAC, 50/60 Hz
LTC 5108/50
220-240 VAC, 50/60 Hz
1.
Models shown are for English on-screen menu model. The model
number and operating voltage are shown on the bottom of the unit.
These units are supplied with grounded power cords; grounding must
not be defeated.
4.2
Mounting
These switchers are half rack units and are supplied as desk
top units. For rack mounting, the LTC 9101/00 rack-mount
kit is available.
5
ATTENTION
FOR HANDLING
ELECTROSTATIC
SENSITIVE
DEVICES
Voltage
Power at
Range
Rated Voltage
105 to 130
4 W
198 to 264
4 W
105 to 130
4 W
198 to 264
4 W