Download Print this page

Cannon OPTIMUM TS Installation Instructions Manual page 10

Electric downriggers
Hide thumbs Also See for OPTIMUM TS:

Advertisement

INSTALLING THE BASE
4
Item(s) needed:
#2 x 4
j.
Take four of the 1/4-20 X 2" Phillips Truss Head
Machine Screws (Item # 2) and apply anti-seize.
Then place one in each of the Mounting Holes. The
Truss Screws should pass through the Swivel Base
and the drilled holes in the mounting location.
k.
Secure the Truss Screws in place with four Flat
Washers (Item #4) and four 1/4-20 Nylock Nuts
(Item # 6). Take one Flat Washer and place it on
the end of each Truss Screw. Secure each Truss
Screw and Flat Washer with Nylock Nuts using a
#3 Phillips Screwdriver. Hand tighten, or tighten to
45 ft-lbs. To prevent seizing of the stainless steel
hardware, do not use high speed installation tools.
NOTICE: To prevent seizing of the stainless steel
hardware, do not use high speed installation tools.
Wetting the screws or applying an anti-seize may help
prevent seizing.
NOTICE: Consider installing an optional Cannon Lock on
the Mounting Base for added security.
5
Item(s) needed:
#8 x 4
l.
The Mounting Base will be installed to the Swivel
Base. At the beginning of the installation, the
Mounting Base was attached to the Downrigger
Assembly. Recall the orientation of the Soft
Grip Knob and the orientation of the Downrigger
Assembly in its intended installation position.
m. Remove the Mounting Base from the Downrigger
Assembly and place it back on the Swivel Base
in the same orientation. The mounting holes in
the corners of both the Swivel Base and Mounting
Base should align. Take four of the 1/4-20 X 1 1/2"
Truss Head Screws (Item # 8) and use them to
secure the Mounting Base to the Swivel Base using
a Phillips screwdriver.
10
#4 x 4
#6 x 4
(Item No. 1903020)
4j
Phillips
Screws
Swivel
Base
Flat
Washer
Flat
Washer
Nylock Nuts
Swivel Base
4j
Phillips
Screws
5l
Swivel
Base
Mounting Holes
Mounting
Mounting Holes
Base
|
© 2019
Johnson Outdoors Marine Electronics, Inc.
Phillips
Screws
Mounting
Flat
Location
Washer
Flat
Washer
Nylock Nuts
Phillips
Screws
Mounting Location
Truss Head Screws
5m
Mounting
Base
Mounting
Swivel Base
Location
|
cannondownriggers.com

Advertisement

loading

This manual is also suitable for:

Optimum