Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for BluStream HD11CTRL
Summary of Contents for BluStream HD11CTRL
- Page 1 HD11CTRL User Manual RevA1_User_Manual_HD11CTRL...
-
Page 2: Table Of Contents
HD11CTRL USER MANUAL Contents Thank you for purchasing Introduction this product. Features For optimum performance and safety, please read these instructions carefully before connecting, operating or Panel Descriptions adjusting this product. Please keep this manual for future reference. EDID Management... -
Page 3: Introduction
CEC, RS-232 and IR when a HDMI signal is sensed on the input. External relay inputs allow third party triggers for integration with devices such as sensors or switches. The HD11CTRL will also help with HDMI compatibility, HDCP2.2, clock stretching, EDID and handshaking issues that are becoming common problems when distributing HDMI signals especially 4K. - Page 4 HD11CTRL USER MANUAL Front Panel Connections: Power LED indicator - illuminates when detecting the device is powered HDMI output LED indicator - illuminates when the device has an active connection to the display IR Learning IR in - IR receiver used for learning IR commands to be used with auto on/off trigger...
-
Page 5: Edid Management
4) EDID DIP switch must be set to 1111 to allow configuration via RS-232 5) Connect your PC to the HD11CTRL RS-232 port via a serial RS-232 cable - refer to the RS-232 Control Port section for further RS-232 information... -
Page 6: Automatic System On/Off Control
Automatic System On/Off Control The HD11CTRL is designed to automate basic control of AV equipment within a room without the need for a 3rd party control system. It can control devices via CEC, RS-232, IR, relay and signal sense. Its key function is to turn the system on when a HDMI signal is sensed, and turn it off when that signal is lost. -
Page 7: Ir Learning
Signal Sensing The HD11CTRL also has the ability to be triggered via signal sense from a device feeding it a voltage such as a PIR sensor. The sensor port features +12V DC and ground to power a PIR sensor, as well as a signal input that triggers when the circuit is closed or grounded. -
Page 8: Rs-232 Control Port
USER MANUAL RS-232 Control Port The HD11CTRL can be controlled via a 3-pin Phoenix to serial RS-232 cable (supplied). All RS-232 commands must be terminated with a carriage return <CR> or \r. The communication settings and commands are as follows:... - Page 9 HD11CTRL USER MANUAL RS-232 COMMAND DESCRIPTION Load the custom external EDID from USB, then save it into slot xx EDIDSAVE xx xx = 22: User EDID 1 xx = 23: User EDID 2 RELAY1 xxx Set The Relay 1 Delay Time To xxx (Default 10s, Range From 3s To 180s, 00=Fixed Open)
-
Page 10: Specifications
32°F to 104°F (0°C to 40°C) Storage Temperature: - 4°F to 140°F (- 20°C to 60°C) Power Supply: 5V/1A DC Package Contents • 1 x HD11CTRL • 1 x 5V/1A DC Power Supply • 1 x IR Emitter • 1 x RS-232 Control Cable •... -
Page 11: Installer Notes
HD11CTRL USER MANUAL Installer Notes: contact support@blustream.co.uk support@blustream.com.au... - Page 12 www.blustream.com.au...
Need help?
Do you have a question about the HD11CTRL and is the answer not in the manual?
Questions and answers