Advertisement
•
Loosen and remove the headset compression bolt and cap.
Note: Headset compression bolts and caps vary. Some styles
require an allen wrench, some require a ratchet and some require a
closed/open end wrench or an adjustable wrench.
Lightly grease the contact areas marked with arrows.
1. Lock bolt and washer
2. Handlebar wedge
3. Lock bolt wedge
4. Threaded wedge
5. Steerer tube wedge
For this installation, we are using the Odyssey Elementary V3.
These instructions are to be used as a guide only. Improperly installed parts may lead to severe injury or harm. We strongly recommend that
a properly trained bike mechanic handle all installations, adjustments and repairs on your bike. As always...Ride Safe!
AMain.com Inc.
Odyssey Elementary Stem Installation
•
1-844-970-4269
Slide the old stem upwards to remove it from the fork steerer
tube.
www.danscomp.com
Page 2
Advertisement
