Advertisement
PARTITION ASSEMBLY INSTRUCTIONS
PARTS LIST: Items supplied - with 560mm Corner Partition
1. Polycarbonate Partition
2. Desk Clamp Set - Allen Key (x1), Desk Protectors (x2), Allen Screws (x2), Clamp
with Allen Screws
3. Corner Post Set (Including x2 Figure 8 attachments)
ADDING CORNER PARTITIONS
Steps:
1.
Assemble the corner partition the same as a
single partition
(see - single partition assembly instruction).
2.
Position corner partition close to main partition.
(Note - Do not fully tighten clamps as further
positioning may be required).
3.
Take off the plastic covers from the top of the
corner post.
4.
Remove fi gure 8 corner attachments.
5.
Position corner post alongside corner partition
and slide corner attachment down attaching
the post to the corner partition.
6.
Adjust positions of corner partitions to line up
the corner post with main partition.
7.
Slide corner attachment down attaching corner
post with main partition.
8.
Put all plastic covers back onto partitions.
9.
Tighten corner partition clamps.
Figure 8
attachments
Advertisement
