BoydVisuals PARTITON Assembly Instructions

PARTITION ASSEMBLY INSTRUCTIONS
PARTS LIST: Items supplied - with 1160mm, 1460mm, 1760mm
1. Polycarbonate Partition
2. Desk Clamp Set - Allen Key (x1), Desk Protectors (x2), Allen Screws (x2), Clamp
with Allen Screws
ATTACHING A SINGLE PANEL PARTITION
Steps:
1. Attach desk clamps to the bottom end of
the partition using the allen key provided in
the clamp set and tighten accordingly.
3. Place partition on the edge of the desk.
Ensure clamps are sitting on the desk
protectors.
2. Place the desk protector pads on the edge of
desk where the top of the clamp will sit.
4. Tighten clamps with allen key at both ends of
the partition.
desk
protector
pads