Powering On/Off - TouMei C800 Series Manual

1. Connect to power:
Plug the DC adapter into the projector's DC IN (5V) power outlet.
.
We present you a USB-4.1mm portable source charging cable to make you can use
portable source to power supply.Remember the portable source must be 5V-2A outp-
ut above.
2. Turn On/Turn Off:
Press and hold Power button on your projector for 3 seconds to turn it on.
Press the power button on the projector long, turn off the device after 1 seconds, or press the
power button on the remote controller for 1 seconds to turn off the device.
When the machine is not able to enter the desktop, you can use a needle to stab the
reset hole.
Battery:
3.
For safety reasons, the projector has a built-in lithium battery that can not be power on by
remote control.
Built in battery life is generally about two hours.
When the battery is low, the brightness drops automatically.

POWERING ON/OFF