Seville Classics AirLift OFF65856 Manual

360 adjustable under-the-desk ergonomic keyboard tray

Download this manual

Enlarged version

FAQS

Q. Do I need to use the wrist rest? Is it removable?

Q. How much space do I need to install?

A. Make sure there's a 6" W x 14.1" L space beneath desk for bracket.

Q. How much can it hold?

A. Tray can hold as much as 5 lbs.

Q. I can use at a corner desk?

Q. Can I hide the tray when I'm done?

A. Yes! Tray is height adjustable, just press it down and slide it under the desk.

Dimensions: 25" W x 20" L x 3.6" H

Bracket dimensions: 6" W x 14.5" L x 3.6" H

Tray dimensions: 25" W x 9.8" L x 0.6" H

Weight capacity: 5 lbs.

Weight: 9.9 lbs.

Telephone: (800) 323-5565

Fax: (310) 533-3899

Hours: 8:30 AM – 4:30 PM (PST)

Email:

Support@SevilleClassics.com

Homepage:

www.SevilleClassics.com

AIRLIFT® 360 Adjustable Under-the-Desk

Thank you for choosing Seville Classics! We hope that you enjoy your

keyboard tray! Please read through this user guide for parts list, assembly

instructions, frequently asked questions and further contact information.

4-2018

Ergonomic Keyboard Tray

Model: OFF65856

4-2018

Page 1 Email: Support@SevilleClassics.com Homepage: www.SevilleClassics.com Model: OFF65856 Thank you for choosing Seville Classics! We hope that you enjoy your keyboard tray! Please read through this user guide for parts list, assembly instructions, frequently asked questions and further contact information. 4-2018 4-2018...
Page 2: Parts List
Parts List STEP 5. Screw LATCH (C) onto bolt, but do not snug. Adjust the TRAY (B) height and turn LATCH (C) A. Bracket (1) DESK B. Tray (1) C. Wrist Rest (1) D. Washers (10) E. Screws (10) Required Tools (not included) Screwdriver Please make sure you have all the parts on this list.
Page 3 STEP 4. STEP 1. Fully extend BRACKET (A). Fit WASHERS (D) over threads on SCREWS (E) BRACKET TIP: Use an electric screwdriver to install screws more quickly.
Page 4 STEP 2. STEP 3. TRAY (B) and BRACKET (A). WRIST REST (C). Place WASHERS (D) over the threads of SCREWS (E) WRIST REST (C) to front of TRAY (B). BRACKET (A) to TRAY (B).