Seville Classics OFF65807 Assembly Instructions

Airlift pneumatic sit-to-stand adjustable desktop converter

AIRLIFT™ Pneumatic Sit-to-Stand

Adjustable Desktop Converter

Model #: OFF65807, OFF65808

Thank you for choosing Seville Classics! We hope that you enjoy your new sit-to-stand

desk. Please read through this user guide for parts list, instructions, frequently asked

questions and contact information.

09-2017

Table of Contents

Need help?

Do you have a question about the OFF65807 and is the answer not in the manual?

Page 1 AIRLIFT™ Pneumatic Sit-to-Stand Adjustable Desktop Converter Model #: OFF65807, OFF65808 Thank you for choosing Seville Classics! We hope that you enjoy your new sit-to-stand desk. Please read through this user guide for parts list, instructions, frequently asked questions and contact information.
Page 2: Parts List
Parts List Use Instructions 1. Pull up on both AIRLIFT™ levers and desktop to lift. 2. Pull up on both AIRLIFT™ levers and press down on desktop to lower. A. AIRLIFT™ Desk (1) FAQS Q. Can I attach a monitor stand to it? What about dual monitors? A.
Page 3 Safety Assembly Instructions Failure to follow these instructions may result in property damage or STEP 1. Remove AIRLIFT™ DESK (A) from box and set on flat table. Weighs 52.3 lbs. personal injury Requires 2 people to lift DO NOT place devices on desk edge. DO NOT route wires through desk legs.
Page 4: Cable Management
STEP 4. Hook BRACKETS (B) over the bolts on the inner legs of the AIRLIFT™ DESK (A). Cable Management Tighten bolts clockwise with included ALLEN WRENCH (E). STEP 5. Pull up on both AIRLIFT™ levers and desktop to lift. Organize loose cables with included ZIP TIES (D). ALWAYS route your cables through the REAR of the desk.

Off65808