Advertisement
Start operation
1. Cleaning the compartment
Before powering on, clean inside of the appliance and check the drainage pipe in good
connection.（For details, please refer to the "Maintenance and cleaning"）
2. Placement
Before powering on, level the appliance on the firm & dry floor for at least 30 minutes.
3. Power on
The appliance start operation and it will cool down inside after 1 hour, otherwise you
should check the power connection.
Control panel
All keys will be invalid if in lock mode. Please unlock first.
ON/OFF
1. Hold down the on/off key for 3 seconds to power down, unit will go into stand-
by mode.
2. Hold downthe on/off key again 3 seconds to return unit back to normal working
operation.
Light
Press the key, turn on or turn off the LED lights inside. In stand-by mode, this
key is invalid.
UP
Press the key once, LED display will begin flashing showing current set
temperature. Continue pressing to adjust set temperature, one press increases
1℃. Flashing will cease after 5 seconds of no activity and new set temperature
will be saved. LED display will return to show actual temperature inside.
Down
Press the key once, LED display will begin flashing showing current set
temperature. Continue pressing to adjust set temperature, one press reduce 1℃.
Flashing will cease after 5 seconds of no activity and new set temperature will be
saved. LED display will return to show actual temperature inside.
Child Lock（Combination key）
1. Lock：Hold down both keys at the same time for 3 seconds to lock.
2. Unlock：Hold down both keys at the same time for 3 seconds to unlock.
Fahrenheit/Celsius display interchange
6
Hide quick links:
Advertisement
