Advertisement
Troubleshooting
The appliance is makes
lots of noise?
Liquid flowing sound
inside the cabinet?
The appliance does not
start？
Compressor runs
continuously?
Door does not seal
tightly？
The appliance does not
cool sufficiently?
Unpleasant smells inside
cabinet？
Condensate on the glass
door？
The light is not working？
Please adjust the front foot, keep the appliance
leveling.
Please keep a bit of space between appliance and
walls.
This is normal because of the refrigerant working
inside.
Make sure the appliance is connected to the power
properly.
Make sure switch on the power.
The compressor re-starts after 5 minutes for a
power cut.
If no cold air is being produced, call the after-sale
service.
After a long period of use, the door seal might get
stiff & distorted partially.
1. Heat the door sea slightly with heat gun or with
or hot towel.
2. The door seal will soften and then close the
door.
Please adjust temperature setting.
Keep the appliance away from sunlight or heat.
Please do not open the door frequently.
A little bit of plastic smell for newly purchased
appliance is normal and will disappear after a short
time.
Clean the compartment and ventilate it for a few
hours.
Please do not open the door frequently or for a
long time.
Please do not set the temperature too low.
High ambient temperature and humidity would
cause condensate.
Check the power supply first.
Call the retailer's after-sale service if the light is
broken.
8
Hide quick links:
Advertisement
