Do you have a question about the MONOTRON 124 and is the answer not in the manual?
Questions and answers
George
April 16, 2025
How do you chang ethnepreset setting on a flash monotron 124
1 comments:
Mr. Anderson
May 9, 2025
To change the preset setting on a Flash Monotron 124, follow these steps:
1. Modify the predefined switching actions using the interface. 2. Use the buttons marked with "+" and "−" to adjust the time values. 3. Confirm changes by holding the button for more than 4 seconds. 4. To revert to the predefined program, use the option labeled "Retour au programme pré-enregistré" or similar in your language.
Page 2
Changing the predefined switching actions Ritorno al programma pre-registrato Modifica degli orari di commutazione Exemple - Beispiel - Example - Esempio : P3 --> P3 6.00 8.00 17.00 23.00 MONOTRON 124 MONOTRON 124 MONOTRON 124 MONOTRON 124 7.30 8.00 17.00 22.30 >...
Need help?
Do you have a question about the MONOTRON 124 and is the answer not in the manual?
Questions and answers
How do you chang ethnepreset setting on a flash monotron 124
To change the preset setting on a Flash Monotron 124, follow these steps:
1. Modify the predefined switching actions using the interface.
2. Use the buttons marked with "+" and "−" to adjust the time values.
3. Confirm changes by holding the button for more than 4 seconds.
4. To revert to the predefined program, use the option labeled "Retour au programme pré-enregistré" or similar in your language.
Example provided:
Preset P3 changes from:
- 6.00–8.00 (ON)
- 17.00–23.00 (ON)
To:
- 7.30–8.00 (ON)
- 17.00–22.30 (ON)
This answer is automatically generated