Yamaha WaveRunner FZR SVHO 2016 Owner's/Operator's Manual page 40

Watercraft operation
Number of Low RPM Mode
beeps
TIP:
If the remote control transmitter is operated
while the dual analog meter unit is in the
standby state, the unit will perform the initial
operation, and then the setting is selected.
To activate the Low RPM Mode:
Push the "L-Mode" (unlock) button on the re-
mote control transmitter for more than 4 sec-
onds. Once the beeper sounds three times
and the "UNLOCK" indicator light blinks
three times, then comes on, the "L-MODE"
indicator light comes on and the Low RPM
Mode is activated.
TIP:
If the Low RPM Mode is activated immediate-
ly after the information display turns off, the
"L-MODE" indicator light will not come on.
The "L-MODE" indicator light will come on
when the engine is started.
1
L-Mode
1 "L-Mode" (unlock) button
2 "L-MODE" indicator light
To deactivate the Low RPM Mode:
Push the "L-Mode" (unlock) button on the re-
mote control transmitter for more than 4 sec-
34
MODE"
operation indicator
light
Comes
Activated
Deactivated Goes off
onds. Once the beeper sounds two times and
"L-
the "UNLOCK" indicator light blinks two
times, then comes on, the "L-MODE" indica-
tor light goes off and the Low RPM Mode is
deactivated. When the Low RPM Mode is de-
on
activated, the watercraft returns to the nor-
mal operation mode.
2