Dangerous power G3 SPEC-R Owner's Manual
  1. Manuals
  2. Brands
  3. Dangerous power Manuals
  4. Paintball equipment
  5. G3 SPEC-R
  6. Owner's manual

Dangerous power G3 SPEC-R Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Related Manuals for Dangerous power G3 SPEC-R

Summary of Contents for Dangerous power G3 SPEC-R

  • Page 3 IMPORTANT SAFETY INSTRUCTIONS AND GUIDELINES! IMPORTANT SAFETY INSTRUCTIONS AND GUIDELINES! 1. The DP G3 Spec-R is NOT A TOY. Treat it with 7. Only use compressed air or nitrogen. DO NOT 14. Never put any body parts or foreign objects into NOTE- POWERING ‘...

  • Page 4: Table Of Contents

    24 4.EXAMPLE SETTING FROM SEMI TO MILLENNIUM 11 OPR PARTS LIST 46 TROUBLESHOOTING 26 CARE AND MAINTENANCE 12 G3 Spec-R BOLT SYSTEM 48 PARTS DIAGRAM AND TABLE 26 DEGASSING THE G3 Spec-R 13 BARREL COVER 27 CLEANING THE EYE-SENSOR BREAK...

  • Page 5: Features

    FEATURES 1. Innovative and highly efficient o-ring-less bolt system. 2. Extremely light weight body (1.79lbs with barrel, patented RAPS ASA, clamping feedneck and battery). 3. Increased air efficiency. 4. High precision light weight 3-D milled aluminum alloy body and accents. 5. Stocked fully programmable micro-switch board. 6. Adjustable magnetic ball bearing trigger. 7. Light weight interlocking ported two piece barrel. 8. Patented low profile clamping feedneck. 9. Patented flip lever Rapid Air Pressurizing System (RAPS) ASA.

  • Page 6: Know Your G3 Spec-R

    A. Low-Rise Clamping Feedneck N. Power Button use and maintenance. For maximum enjoyment and safety while using your G3 Spec-R, please take the time to acquaint yourself with its operation, controls, programmable features, and care and maintenance instructions found B. G3 Spec-R Body O.

  • Page 7: Inline Regulator

    INLINE REGULATOR OPR PARTS LIST A. C-clip B. OPR Bottom Swivel Screw C. OPR Bottom Housing SHIM STACK D. Regulator Seat O-ring E. Regulator Adjustment Screw F. OPR Main Body Housing G. OPR Piston Washers x 8 H. OPR Piston OPR Piston Base Sealing Gasket J.

  • Page 8: G3 Spec-R Bolt System

    G3 Spec-R BOLT SYSTEM BARREL COVER • Place the barrel cover over the tip of the barrel and pull the elastic band over the feedneck or back of marker before attaching paintball loader. G3 Spec-R BODY WARNING FOR YOUR SAFETY, ALWAYS HAVE THE BARREL COVER ON WHEN NOT PLAYING.

  • Page 9: Attaching A Paintball Loader

    TAKE CARE NOT TO USE ExCESSIVE FORCE - DOING SO MAY CAUSE DAMAGE TO LOADER OR THE PROPER FITMENT. ALWAYS CHECK TO MAKE SURE THE MACRO-LINE HOSE IS SEATED ALL THE WAY G3 Spec-R! TO THE END OF THE ELBOW.

  • Page 10: Attaching Air Tank To Raps

    Return flip lever of the RAPS ASA to the ‘close’ position. • Turn screw counterclockwise to increase velocity. • A brief sound of air entering the system is normal. The G3 Spec-R is now pressurized. • Turn screw clockwise to decrease velocity. WARNING WARNING FAILURE TO FOLLOW REGULATIONS REGARDING MAxIMUM ALLOWABLE VELOCITY, CALCULATED NITROGEN OR COMPRESSED AIR TANKS ONLY! NEVER USE CO2.

  • Page 11: Trigger Adjustment

    TRIGGER ADJUSTMENT BOARD • There are three (3) adjustment screws (marked A, B and C) to adjust the trigger on the G3 Spec-R. TRIGGER • Screw A (5/64”) adjusts the amount of trigger travel prior to the marker firing. Turning this screw clockwise will POWER ON Fires the marker.

  • Page 12: Programming Your G3 Spec-R

    PROGRAMMING YOUR G3 Spec-R PROGRAMMING YOUR G3 Spec-R (CONTINUED) 1. POWER 2. TOURNAMENT LOCK • DIP switch 1 set to “ON”. Modes cannot be set without POWER ON unlocking tournament lock. • Press and hold down Button A to turn on the marker with •...
  • Page 13 PROGRAMMING YOUR G3 Spec-R PROGRAMMING YOUR G3 Spec-R (CONTINUED) (CONTINUED) 3. CONFIGURATION MODE ▌ FIRING MODE • Setting Options as below: Mode Description Functionality Factory Semi First 1 shot per trigger pull. Min/Max Mode Default Three semi shots then transitions to 3 round bursts. Returns to semi mode after 1 second PSP3 of no activity.

  • Page 14: 24 4.Example Setting From Semi To

    PROGRAMMING YOUR G3 Spec-R (CONTINUED) RESET To reset the marker to manufacturing default settings, press and hold down the trigger then press and hold down the on/off button. Release the on/off button and hold on to the trigger for 10 seconds until yellow light appears.

  • Page 15: Care And Maintenance

    CLEANING THE EYE-SENSOR BREAK BEAM SYSTEM Routine care and maintenance for your Dangerous Power G3 Spec-R will ensure many years of high performance The function of the break beam sensor eyes is to allow the firing circuit to ‘time’ the activation of the solenoid. This and enjoyment.

  • Page 16: Cleaning The Ball Detents

    5. With a cotton swab, gently wipe the back and front side of the eye sensor and the eye socket to remove any debris or residue. (SEE PIC E) 1. Locate the eye cover plates on either side of your G3 Spec-R body. 2. Using provided allen key wrench (5/64”), carefully remove the eye cover screw on one side by inserting ball 6.

  • Page 17: Operating Pressure Regulator (Opr) Disassembly And Maintenance

    The OPR regulates the amount of air-flow, which determines paintball velocity. Regular inspection and cleaning of (SEE PIC D) your OPR is an essential part of keeping your G3 Spec-R running in top condition. Follow the easy steps outlined below to ensure that your OPR remains trouble-free.
  • Page 18 OPERATING PRESSURE REGULATOR (OPR) OPERATING PRESSURE REGULATOR (OPR) DISASSEMBLY AND MAINTENANCE DISASSEMBLY AND MAINTENANCE (CONTINUED) (CONTINUED) 3. By hand or with the assistance of a strap wrench, unscrew the OPR Top Housing Ring from the OPR Main 6. Using ‘C-clip’ pliers (not supplied), carefully remove the C-clips from the OPR Bottom housing. Make sure not Body Housing.

  • Page 19: Cleaning And Maintenance Of Opr

    OPERATING PRESSURE REGULATOR (OPR) OPERATING PRESSURE REGULATOR (OPR) DISASSEMBLY AND MAINTENANCE DISASSEMBLY AND MAINTENANCE (CONTINUED) (CONTINUED) CLEANING AND MAINTENANCE OF OPR 4. Apply lubricant to the o-ring located on the base of the OPR Piston. (SEE PIC C) 5. Apply lubricant to the o-ring located on the stem of OPR Piston. (SEE PIC D) 1.

  • Page 20: Disassembly And Maintenance Of Dump Valve Bolt And Dump Valve Plug

    THE ABOVE STEPS ARE ALL THAT ARE REQUIRED FOR NORMAL BOLT MAINTENANCE. PROCEED 5. Wipe off all visible debris and grime from the Dump Valve Bolt, Dump Valve Plug and internal of G3 Spec-R FURTHER TO ACCESS SOLENOID AND TRIGGER.

  • Page 21: Separating G3 Spec-R Body

    Connector Screw #1 by turning it counterclockwise. (SEE PIC A) 2. Locate Connector Screw #2 behind back cap. Using (5/32”) allen key wrench, loosen screw by turning it 1. Once the G3 Spec-R body and trigger frame are separated, locate the solenoid within the marker body. Note counterclockwise. (SEE PIC B) the wiring harness connecting the solenoid to the main circuit board.
  • Page 22 SOLENOID MAINTENANCE SOLENOID MAINTENANCE (CONTINUED) (CONTINUED) 4. Using (5/65”) allen wrench key, locate and remove both screws securing the solenoid to the marker body. 8. Remove solenoid spring. (SEE PIC H) (SEE PIC D . E) 9. With thin tweezers or needle nose pliers, carefully remove the solenoid piston by gently securing the tip 5.
  • Page 23 1. Remove macro-line from RAPS ASA. (SEE PIC A) 3. Remove trigger assembly by lifting it up and out of G3 Spec-R trigger frame. (SEE PIC E) 2. Remove butterfly grip panels from trigger frame. (SEE PIC B) 3. Disconnect solenoid wiring harness from circuit board. (SEE PIC C) 4.

  • Page 24: Raps™ Flip Lever Asa Removal And Maintenance

    WARNING 10. Check spring for proper tension. Replace if worn or damaged. REMEMBER TO DE-GAS THE G3 SPEC-R BEFORE SERVICING THE RAPS ASA. FOLLOW INSTRUCTIONS PREVIOUSLY OUTLINED ON PAGE 41 TO SAFELY AND PROPERLY REMOVE ExCESS AIR FROM THE MARKER.

  • Page 25: Troubleshooting

    TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION PROBLEM POSSIBLE CAUSE SOLUTION Hold down operating button for more than 4 Air leaking from Bolt cap o-ring is worn Change o-ring Not activated seconds barrel area G3 Spec R will not Internal o-ring is worn or damaged Change o-ring Low battery power Replace with fresh battery turn on Paintball breaking...

  • Page 26: Parts Diagram And Table

    PARTS DIAGRAM AND TABLE ITEM NUMBER O’ty NOTE ITEM NUMBER O’ty NOTE 20-B01265-301-PSPE0B 20-B30854-301-PSPE0B 20-F01540-000-PFUS0A Ø18.77*Ø1.78 20-W60010-000-PREV0B 20-F01730-000-PTHR7A Ø17.17*Ø1.78 20-W63020-000-PREV0B Ø3*T3 20-F01800-000-PSPE0B Ø19*Ø2 20-W11042-000-PREV0B #10-32UNF-6L 20-A40130-305-PSPE0B 20-H03210-000-PSPE0B #3-56UNF-15L 20-W11012-000-PFUS8A #8-32UNC 20-B10332-305-PSPE0B 20-F05050-000-PSPE0B 20-W23670-000-PSPE0B 20-W10840-000-PFUS0A #3-56UNF-5/32”L 20-A40140-301-PSPE0B 20-W23510-000-PFUS0A 20-B10343-301-PSPE0B 20-E10170-000-PT00 20-B10352-300-PSPE0B 20-F10160-000-PSPE0B 20-F01810-000-PSPE0B Ø13*Ø2 20-W11040-000-PSPI0B #10-32UNF-5/16”L...

  • Page 27: Statement Of Liability

    STATEMENT OF LIABILITY DANGEROUS POWER warrants this G3 Spec-R paintball marker, to the initial retail purchaser, to be free from The manufacturer assumes no responsibility for this product’s safe operation upon sale or distribution. PROPERTY defect in original materials and/or workmanship for twelve (12) months from the original date of purchase, with the DAMAGE, BODILIY INJURY, OR DEATH could occur due to misuse, abuse or failure to follow the manufacturer’s...
  • Page 28 Product Serial Number (if applicable) __________________________________________ I guarantee all of the information completed above to be true and correct to the best of my knowledge. Signature ________________________________________________________________ Date ______________ Visit www.dangerouspower.com for more information on how to claim warranty. DANGEROUS POWER™ 9/09...
  • Page 29 NOTES: W W W . D A N G E R O U S P O W E R . C O M...

Table of Contents