Effects Tab; Effect Tab; Reverb/Qxpander/Qmss To External Input Source; Enable - Philips PSC705/05 User Manual

Effects Tab

Reverb/QXpander/QMSS to External Input Source

Reverb, QXpander (when enabled), and expansion of stereo to 4 or 5.1 channels (QMSS) are automatically
applied to all sounds generated by applications running on your PC however they are not applied to inputs such
as analog "CD In" and "Line In" unless that input is selected on the "Apply Reverb/QMSS/QXpander to External
Input Source " selector pull-down menu.
For example if you are using the Microsoft "CD player" which uses the analog "CD In" connector to play CD's or
if you are using a tape deck or other external device connected to "Line In" you must select the input here to
enable conversion these stereo sources to 4 or 5.1 channels using QMSS. However if you are using an
application that is not dependent on these connections such as a game, MP3 player, or a CD player that uses
digital extraction rather than analog "CD In" (such as the included Siren JukeBox application) then QMSS is
used to automatically convert these sources to 4 or 5.1 channels (when in 4 or 5.1 speaker mode).
These controls allow you to manage the application of reverb and QSound Environmental Modeling™
(QEM™). QEM provides EAX 1.0/2.0 game compatibility and the ability to apply reverb to non-EAX sources
including applications, and external inputs.

Enable

When playing games supporting EAX properties select the "Enable" box under "Reverb/QSound Environmental
Modeling". Set the Environment selector to "- none –" to avoid reverb being applied to non-EAX applications.
To apply reverb to non-EAX applications also select a reverb type using the "Environment" selector described
below and adjust the reverb level using slider corresponding to the source.
33