Wade J-105-HI-WC Instruction Sheet

9
10
DESCRIPTION:
The J-105-HI-WC is a heavy duty 75-ohm antenna, specifically designed for master antenna (MATV) distribution
systems.
ASSEMBLY AND MOUNTING:
1. Carefully read through the instructions and study the figures before you begin installation of the antenna.
2. Inspect antenna visually upon reception for shipping damages and report them immediately if any have
occurred.
3. Swing the front of the crossarm into position and secure it to the main upper crossarm with the machine
screw, lock washer and hex nut supplied; wrench tighten both securing hex nuts. (see Figure 1)
4. Assemble the elements onto the crossarms in their respective positions as denoted by their length. Note the
relationship of the elements to the upper and lower crossarms; the elements must be positioned as shown in
Figure 1, Figure 2 and Table 1. DO NOT overtighten the hex bolts securing the elements.
1
2
3
4
5
6
7
8
9
9
10
Figure 2
ELEMENT POSITIONS
J-105-HI-WC VHF HI-BAND
MATV ANTENNA
(Channels 7 thru 13)
9
7
8
FIGURE 1
Figure 1
J-105-HI-WC MOUNTING
CROSSARM ASSEMBLY
33.00"
17.50"
15.75"
15.00"
14.00"
Note: Elements shown in phantom are
13.25"
mounted to lower crossarm.
12.50"
11.75"
24.50"
24.50"
22.25"
Please Note: A qualified structural engineer
should be consulted prior to mounting an
antenna on a tower or support structure.
6
5
4
3
2
1
ELEMENT QUANTITY ELEMENT
NUMBER REQUIRED
1
2
3
4
5
6
7
8
9
10
Table 1
Instruction Sheet
30362001 Rev. J
LENGTH
1 33.00 in
2 17.50 in
2 15.75 in
2 15.00 in
2 14.00 in
2 13.25 in
2 12.50 in
2 11.75 in
2 24.50 in
1 22.25 in