Maintenance - Stiga SNOW KICK FREE Assembly & Instruction Manual

CAUTION!
Read the manual carefully before using your new product.
• This product should always be assembled by an adult.
• Make sure that all screws are tightened before each trip.
• We recommend that you wear a helmet when using the product.
• Be careful when riding this product in order to avoid falls or collisions which can injure the
user or other people.
• The product has no brakes. Avoid high speed.
• The product can be used on level ground and downhill slopes with small moguls. NOTE: Do
not use on pistes intended for Alpine skiing with big moguls. There is a risk for personal injury in
the event of a fall or if the product breaks.
• Must not be used in traffic. Do not tow behind motorized vehicles.
• Do not let children use the product without adult supervision.
• All use of the product is at one's own risk.
• The instructions should be saved in case it becomes necessary to lodge a complaint with
regard to the product.
ASSEMBLY
See pictures on page 2
1. Assemble the skis at the designated location. (1a & 1b)
2. Mount the handle bar on the base platform. Tighten the bolts on the handle bar firmly, so that
the handle bar is in locked position.
3. Assemble the handle bar. Place the screws in the holes according to 3b. Push down the screws
while tightening the nuts firmly.
4. Adjust the handlebars to suitable height (make sure the spring button is in the locked
position) and tighten the quick release collar properly.

MAINTENANCE

After use, dry off the product and store it indoors or under a roof.
STIGA Snow Kick FREE - Art.nr. 75-1121-XX
7+
Max user weight
ENGLISH
50 KG
7
GB