The following tools are required for the
installation:
To mount the loudspeaker on the floor stand:
Hex wrench 5
Hex wrench 6
To mount the loudspeaker on the wall:
Drill with 5mm bit
Spirit level
Pencil
Torx screwdriver T20
Hex wrench 5
3
Installation instructions
Roger Dynamic SoundField
1. Selecting the right location
1) Identify an open and safe place, ideally in front of the class,
Option 1
Option 2
e. g. on the right or left side of the whiteboard or blackboard.
DigiMaster 5000
DigiMaster 7000
DigiMaster 7000