Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Phonak Manuals
  4. Speaker System
  5. Roger Dynamic SoundField
  6. Installation instructions

Phonak Roger Dynamic SoundField Installation Instructions

Hide thumbs
1
2
3
4
5

Advertisement

Quick Links

Download this manual
The following materials are included (if any are missing, contact your local Phonak dealer):
Roger DigiMaster package
A
A
DigiMaster
loudspeaker (1x)
Follow these installation instructions carefully to make sure your Phonak Dynamic SoundField system is properly installed.
Dispose of the packaging material as per local regulations.
1
Installation instructions
Roger Dynamic SoundField
A
Power adapter and power cable
(delivered in DigiMaster)

Advertisement

loading

Summary of Contents for Phonak Roger Dynamic SoundField

  • Page 1 The following materials are included (if any are missing, contact your local Phonak dealer): Roger DigiMaster package DigiMaster loudspeaker (1x) Power adapter and power cable (delivered in DigiMaster) Follow these installation instructions carefully to make sure your Phonak Dynamic SoundField system is properly installed. Dispose of the packaging material as per local regulations.
  • Page 2 Installation instructions Roger Dynamic SoundField Optional: Standard ‘DigiMaster Floor Stand’ including: Box (1x) Stand plate (1x) Tube connection (1x) Stand tube (1x) Torx screwdiver T20 (1x) Hex-screws (2x) and hex wrench 5 (1x) and hex wrench 6 (1x) Clamps (2x)

  • Page 3: Installation Instructions

    Installation instructions Roger Dynamic SoundField The following tools are required for the 1. Selecting the right location installation: 1) Identify an open and safe place, ideally in front of the class, To mount the loudspeaker on the floor stand: e. g. on the right or left side of the whiteboard or blackboard.

  • Page 4: Installation

    Make sure the power cable is safely positioned! 3) Push the anchors into the holes. Mount the wall support using Please check the Phonak SoundField User Guide to learn about the the 4 torx screws and the torx T20 screwdriver.
  • Page 5 Installation instructions Roger Dynamic SoundField 2.3 How to upgrade the DigiMaster? 1) Connect the USB cable to the DigiMaster’s mini-USB jack on the top of the loudspeaker, as depicted below. 2) Connect the cable to computer running Roger Upgrader software.