Your New Monitor; Connecting Your Monitor - Compaq S710 User Manual

Your New Monitor

Please make sure the following items are included with your monitor. If any items are
missing, contact your dealer.
Manual
Stand

Connecting Your Monitor

1
Turn off your computer and unplug
the power cord.
2
Signal cable
Connect the end of the signal cable to
your computer's video port (Video
board, video card, or graphics card). If
you are using a Macintosh computer,
connect the cable to a Macintosh
adapter, and set the pins on your
adapter (Adapter not included). A PC-
compatible computer does not need
an adapter.
3
Power port
Connect the power cord for your
monitor to the power port on the back
of the monitor.
English 2
EXIT MENU
EXIT MENU
Monitor
(Not available in all locations)
4
Power cords
Plug the power cord for the monitor
and the power cord for your computer
into a nearby outlet.
5
Turn on your computer and monitor.
If your monitor displays an image,
installation is complete.
6
Install monitor driver
•
Insert the provided diskette into the
A drive.
•
Open Read Me file. Follow instructions.
Driver
Installation Diskette
Power Cord
Warranty card