Related Manuals for Luxor LE40WTUD
Summary of Contents for Luxor LE40WTUD
-
Page 1: Installation Manual
INSTALLATION MANUAL UNIVERSAL FLAT PANEL DISPLAY CART Model: LE40WTUD LUXOR FURNITURE 2245 Delany Rd. Waukegan, IL 60087 Phone: 847-244-1800 ● 800-323-4656 Fax: 847-244-1818- ● 800-327-1698 9532-000-384-00... -
Page 2: Table Of Contents
Congratulations on the purchase of your new Luxor Furniture LE40WTUD Flat Panel Display Cart. The LE40WTUD is a totally integrated mount/cart solution for 32” – 50” flat panel displays. To truly appreciate the capabilities and versatility of the LE40WTUD Flat Panel Display Cart, please read this installation manual completely. -
Page 3: Luxor Cart Parts List
Please familiarize yourself with all components contained herein. NOTE: Please review all WARNING and CAUTION statements (see Page 2) before beginning the NOTE: installation of the LE40WTUD Flat Panel Display Cart. Bottom Shelf Short Legs (Qty 4) (Qty 1) Center Shelf... -
Page 5: Le40Wtud Shelf Cart Assembly Instructions
LE40WTUD LE40WTUD Shelf Cart Assembly Instructions Long Legs (Qty 4) Rubber Mallet Caster Wheels Bottom Shelf Rubber Mallet Bottom Shelf Step 1. Push the four casters firmly into the holes in each Step 2. Insert four (4) long legs into each corner. Using corner of the bottom shelf. -
Page 6: Electrical Assembly And Cable-Track Management System
LE40WTUD Electrical Assembly and Cable-Track Management System Your LE40WTUD Flat Panel Display Cart incorporates the Cable-Track™ Cord Management System. This exclusive feature manages electrical cords, keeping them safely out of the way. This system includes a 3-outlet, 15 foot surge suppressing electric assembly (U.L. -
Page 7: Base Mount Assembly And Installation
LE40WTUD Base Mount Assembly and Installation Determine where the mounting points are on the top shelf of the Luxor Cart (Arrows). Step 1. A – Sandwich Mounting Plate Mounting Points (10x32 x 2” Socket Head Screw, M5 Flat Washer, and M5 Lock Washer Qty 6). - Page 8 Luxor Cart Mounting Point Place the upper sandwich plate flat on the top shelf of the Luxor Cart. Line up the mounting holes that are Step 5. located on the upper sandwich plate with the mounting holes that are located on the top shelf.
-
Page 9: Final Assembly
Once the short legs are lined up with the mounting posts of the top shelf, tap the top shelf firmly onto the short Step 2. legs using the supplied rubber mallet. This will complete the first part of the LE40WTUD assembly. Place the grommet pass through into the hole located behind the aluminum block. -
Page 10: Tts Stand Parts List
LE40WTUD TTS Stand Parts List Please familiarize yourself with all components contained herein. NOTE: Please review all WARNING and CAUTION statements (see Page 2) before beginning the installation of the NOTE: TTS Stand. Mounting Brackets Griplate™ (Qty 8) (Qty 2) - Page 11 This wall mount is shipped with all proper installation hardware and components. Make sure that none of these NOTE: parts are missing before beginning installation. If there are parts missing stop the installation and contact Luxor Furniture. Page - 11 -...
- Page 12 LE40WTUD NOTE: The nylon spacers may be stacked to achieve proper spacing. 9/16" Nylon spacers 1/4" Nylon spacers (large) (Qty 6) (Qty 6) 5/16" Nylon sleeves 1/2" Nylon spacers (Qty 4) (large) (Qty 12) 5/16" Flat washers (metal) (Qty 6) 1"...
- Page 13 LE40WTUD Thread Depth Indicator Insert the thread depth indicator (supplied) through the thread inserts found on the back of the flat panel to make sure the inserts measure the same full depth and mark it (Figure 1). Locate the correct diameter screw for the thread insert. Compare your marking to the screws (supplied).
-
Page 14: Tts Stand Assembly
LE40WTUD TTS Stand Assembly Mounting Points Mounting Points Step 1. Place the display on a soft and flat surface. Step 2. Locate the mounting points that are on the back of the display. Screwdriver Mounting Brackets Griplate™ Mounting Hardware Step 3. Place the mounting brackets over the mounting points. - Page 15 LE40WTUD Support Pole Allen Wrench M8 x 10mm Socket Head Set Screw Step 5. Slide each support pole into the mounting bracket. Step 6. Make sure the support poles are even (see NOTE: below), and then tighten the M8 x 10 socket head set screw with the Allen wrench (supplied).
-
Page 16: Back Cover Plate Installation
LE40WTUD Support Poles Display Mounting Brackets Aluminum Block Base TWO PEOPLE WILL BE NEEDED FOR THE FOLLOWING STEPS. Step 7. After the assembly has been put together, make sure all the hardware is tight. Step 8. Two people should carefully lift the assembly and place the bottom of the support poles into the aluminum block base.
Need help?
Do you have a question about the LE40WTUD and is the answer not in the manual?
Questions and answers