Advertisement
8. Calibrate the cameras
Calibrate the cameras one by one. To adjust lenses and calibrate the cameras you will need an HD
monitor with an HDMI port and an HDMI cable (included in the package). Turn on the first camera, set it
up at 1080p at 60fps operation mode and connect the camera to the monitor with the HDMI cable
(insert the cable in the microHDMI port on the camera at the bottom of PTRig). The image from the
camera may appear blurred. Adjust the lens by rotating it clockwise until the image on the monitor
becomes clear and sharp. Make sure that all the objects (close and far) are in focus. After the first
camera lens is adjusted, proceed in the same way with the remaining cameras.
PTRIG
S ETUP
M ANUAL
10
Advertisement
