Download Print this page

NOBOCOOL HUB Setup

Download this manual

HUB SETUP

Table of Contents

Page 1 HUB SETUP...
Page 2: Table Of Contents
Contents: Important information ......1 System setup ........1, 2 Advanced setup ........2 Control via Internet ......3 Remove the HUB ......... 4 Contact us ..........4...
Page 3: Important Information
ID code on the wireless network. To install the HUB, follow the App setup wizard. The app will search for the HUB, and dis- play the results on the screen. Press the ID code corresponding to your HUB.
Page 4: Advanced Setup
NB: Only one HUB can be installed at a time. For security reasons, you will be asked to type in the 3 last digits of your HUB ID code. Do not mount the HUB on the wall until the setup is finished, in case you need to check the ID code again.
Page 5: Control Via Internet
Control via Internet: After the app has been connected to the HUB through a local network, it can also be operated later remotely via the Internet. The system security is based on your local network being protected from unauthorised access. Please make sure your local, wireless network is password-protected against intruders.
Page 6: Remove The Hub
Remove the HUB: Removing the HUB from the app means the Energy Control System can no longer be controlled by that particular phone or tablet. Other devices connected to the same HUB will not be affected, and can still be used as normal.