Screen Description - Velleman NETBSEM User Manual

a. Setting of the Current Time and Weekday
1. Hold MODE, + and – simultaneously pressed to enter the programming
mode.
2. Change the value of the blinking item with + or – and select the next
item by pressing MODE.
3. When finished programming the time and date, press MODE to program
cost tariff n° 1.
b. Setting of Cost Tariff N° 1
1. Change the value of the blinking item as per above.
2. Begin with programming the start time of the day tariff.
3. Once the start time programmed, continue with entering the day tariff.
4. Press MODE to program cost tariff n° 2.
c. Setting of Cost Tariff N° 2
1. Change the value of the blinking item as per above.
2. Begin with programming the start time of the night tariff.
3. Once the start time programmed, continue with entering the night tariff.
4. Press MODE to confirm the programmed data.

4. Screen Description

a. Current Time, Weekday, Load Power and Current Tariff
14 14 14 14: : : : 52 52 52 52
0 0 0 0
04 04 04 04. . . . 5 5 5 5
THU
b. Total Recorded Time, Total Used Energy and Accrued Energy Cost
TOTAL COST
0 0 0 0 : : : : 33 33 33 33
0 0 0 0
04 04 04 04. . . . 5 5 5 5
c. Total Recorded Time, Total Power-On Time and Percentage
TOTAL TIME
0 0 0 0 : : : : 37 37 37 37
0 0 0 0
04 04 04 04. . . . 5 5 5 5
NETBPEM / NETBSEM
W
COST/h
RECh
KW/h
COST
RECh
ONh
%
Current time
Load power
Current tariff
Weekday
Total recorded time
Total used energy
Accrued energy cost
Total recorded time
Total power-on time
Percentage
- 4 -
SET TIME
14:52 14:52
14:52 14:52
THU
SET COST
07 07 07 07: : : : 00 00 00 00
COST/h1
05 05 05 05. . . . 3 3 3 3
SET COST
20 20 20 20: : : : 00 00 00 00
COST/h2
04 04 04 04. . . . 5 5 5 5
COST/h
COST/h
VELLEMAN