Advertisement
* Install latest SI.FI firmware
- NOTE: Firmware updates require an active internet connection.
- Connect your Windows PC to the same network as the SI.FI. Open Windows Explorer and click on the "Network"
dropdown on the left.
- Click on the SI.FI icon.
- Double click on the SI.FI logo and enter the password.
* Default password: ADMIN (password is case sensitive)
- Click "Update" and follow the on-screen instructions.
* NOTE: Your SI.FI will reboot after the firmware update is complete. Return to the home screen before
continuing.
* Motor test:
- Before commissioning your motors, you should test the operation of the network (all motors should have
limits set). Select troubleshoot from the menu. Select either the up or down arrow. All motors on the system
should move to either the upper or lower limit. If a motor(s) did not move, you may have to check the wiring to
insure it has proper communication and power.
* Commission SDN motors:
- Select the "Motors" tab and click the Spyglass icon to discover all SDN motors on the network.
- Select the motor you wish to commission and set the label and intermediate positions.
Repeat steps for each motor on the system (for a step-by-step walkthrough of this process please reference our
SDN/SI.FI programming guide on our website).
- Confirm proper motor operation using virtual keypads on the SI.FI home screen.
* Assign motors to groups
- Click on the "Groups" tab and then the "Add" button.
- Name the Group, then click and drag the group name to one or more of the groups columns for each of the
previously labeled motors.
* NOTE: All motors must be assigned to at least one group. Each motor can belong to up to 16 groups.
* Your SDN motorized products are now fully programmed and ready for control from;
- Third-party systems
* Connect to third-party controller via IP (refer to the full SDN/SI.FI programming guide on our website for
more information about integration reports).
- Somfy controls
* Using Somfy software tools available for download on Somfy's website.
* Add DecoFlex SDN keypads or RTS receivers to the SDN system to complete a stand-alone SDN solution.
- PC or Mobile device
* Enter the SI.FI's IP address into a chrome browser window to access.
Screen Innovations 9715 B Burnet Road, Suite 400 Austin, TX 78758 (512) 832-6939
Version 1.0
Advertisement
