.
Section 4: Bluetooth Configuration
These settings are located on the "Configuration" tab of the Aimtrak utility
The slider defines how many seconds of no-activity elapse before the unit
disconnects the Bluetooth link. Or you can opt to have the device never
disconnect but this will consume much more battery power.
The device will re-connect after sleep, when the trigger is activated. This takes
less than 1 second.
Different device IDs can be assigned and this should be done when using more
than one, on a host system. Note that the ID defined here only affects the
visibility of the device in this utility. The Bluetooth host will automatically assign
functional IDs to each device based on the device unique address. All are sent
out with unique addresses.
7