Advertisement
configure the System for Data Access
4
The Data Domain system provides multiple protocols for data access: NFS,
CIFS, VTL, and OST (OpenStorage). You need to configure one or more
protocols for data access, depending on your environment. You also need to
configure the clients for accessing the Data Domain system with the protocol
of your choice.
NFS
The NFS configuration section in the Perform Initial System Configuration sec-
tion sets up the NFS clients to allow access to /backup on the Data Domain
system. You need to set up the NFS clients as well to allow access to /backup
on the Data Domain system. This can be done using the following steps:
4 Create a mount point (directory) such as /dd/rstr01/backup, and
create an administrative mount point, such as /dd/rstr01/ddvar.
4 NFS mount the directories on the new mount points. For example:
mount -F nfs -o hard,intr,vers=3,proto=tcp,rsize=327
68,wsize=32768 rstr01:/backup /dd/rstr01/backup
mount -F nfs -o hard,intr,vers=3,proto=tcp,rsize=327
68,wsize=32768 rstr01:/ddvar /dd/rstr01/ddvar
4 Add the following lines to the file /etc/vfstab (the file name may be
different depending on your UNIX-based system). The lines mount the
directories at every reboot. For example:
system:/backup - /dd/rstr01/backup nfs - yes
hard,intr,vers=3,proto=tcp, rsize=32768,wsize=32768
system:/ddvar - /dd/rstr01/ddvar nfs - yes
hard,intr,vers=3,proto=tcp, rsize=32768,wsize=32768
4 To cause backup software to abort when the system is not mounted,
create a backup directory within the mounted file system, such as
/dd/rstr01/backup/disk1.
4 For more configuration information see the specific Data Domain Integration
Documentation at https://my.datadomain.com/US/en/integration.jsp.
configure Optional Software
5
If you purchased optional software for the Data Domain system such as
Replicator or Retention Lock, the licenses are enabled on your Data Domain
system prior to shipment. You need to configure them for use. Details on
Perform Optional Additional System configuration
6
ADDITIONAl SYSTEM cONFIGurATION
Any system command that accepts a list, such as a list of IP addresses, accepts
entries separated by either commas or spaces. See the Command Reference
card for command details.
Give access to additional backup servers:
# nfs add /backup {*|client-list}
[options]
Add users to the email list that reports system problems:
# alerts add email-list
Add users to the system report email list:
# autosupport add email-list
From a remote machine, add an authorized SSH public key:
# ssh-keygen -d
# ssh -l sysadmin rstr01 "adminaccess add ssh-keys"\
< ~/.ssh/id_dsa.pub
Troubleshooting Tips
For troubleshooting information see the Data Domain support web site https://my.datadomain.com.
cIFS
The CIFS configuration section in the Perform Initial System Configuration
section sets up the CIFS clients to allow access to /backup on the Data
Domain system. You need to set up the CIFS clients as well to allow access to
/backup on the Data Domain system. For additional configuration informa-
tion see the specific Data Domain Integration Documentation at
https://my.datadomain.com/US/en/integration.jsp.
vTl (OPTIONAl lIcENSE rEquIrED)
For the VTL software option, see the Data Domain technical note Integrating
the Data Domain Appliance VTL with SANs. See the specific Data Domain
Integration Documentation for setting up backup software from other
vendors: https://my.datadomain.com/US/en/integration.jsp.
OPENSTOrAGE (OPTIONAl lIcENSE rEquIrED)
For setting up the Data Domain OST feature, see the Data Domain
OpenStorage (OST) Administration Guide available at
https://my.datadomain.com/US/en/platform.jsp.
APPlIcATION INTEGrATION
For information about how to integrate the Data Domain system with backup
software, see the documentation for the applicable application at the Data
Domain Integration Documentation section on the Data Domain support web
site https://my.datadomain.com/US/en/integration.jsp.
configuring the optional software can be found in the Data Domain Operating
System User Guide (OS 4.6 or earlier) or Administration Guide (OS 4.7). Access
the latest documents at https://my.datadomain.com/US/en/platform.jsp.
Enable FTP or TELNET (SSH is enabled by default):
# adminaccess enable {ftp|telnet|ssh}
Add remote hosts to use FTP or TELNET:
# adminaccess add {ftp|telnet}
fqdn-host-list
Add a user:
# user add name [priv {admin|user}]
Change a user's password:
# user change password username
TO SHuT DOWN THE SYSTEM
Important:
Never shut down the system by pressing the power button.
Instead, use
# system poweroff
Advertisement
