Download Print this page

Advertisement

Quick Links

AMT Limited Warranty. Duration of this warrantee will remain in effect for one year from the date of the original purchase. The original
dated sales receipt may enforce this warranty or other proof of warranty coverage is presented when warranty service is required.
What is covered? Except as specified below, this warranty covers all defects in materials and workmanship in this product. The following
are not covered by the warranty:
1.
Damage resulting from accident, misuse, abuse or neglect.
2.
Failure to follow instructions included with microphone.
3.
Repair or attempted repair by anyone not authorized by A.M.T.
4.
Failure to remove battery when storing.
5.
Cause other than product defects including: lack of skill, competence, or experience of use.
6.
Damages occurring during any shipment of this product (claims must be presented to carrier).
7.
Damage to any unit which has been altered, or which the serial number has been defaced, modified, or removed.
AMT will pay all labor and material expense for covered items. Shipping charges are discussed later in this warranty. If your unit needs
service, please write or telephone us and we will advise you where the unit should be taken or sent. If you write us, include your name,
complete address, daytime telephone number, and a description of the problem.
DO NOT RETURN YOUR UNIT TO AMT WITHOUT A REPAIR AUTHORIZATION NUMBER.
If it is necessary to ship the product for service:
1.
You must pay initial shipping charges, but if the warrantee covers necessary repairs, AMT will cover the return shipping charges via
carrier of AMT's choice to any destination within the United States.
2.
Whenever warranty service is required a copy of the original dated sales receipt must be presented.
3.
For products purchased outside of the USA, please contact 973-222-1865 for information pertaining to your country.
Exclusion of certain damages: AMT's liability for any defective product is limited to repair of replacement of the product of our option.
AMT shall not be liable for damages based upon inconvenience, loss of use of the product, loss of time, interrupted operation, commercial loss;
or any other damages whether incidental, consequential, or otherwise.
Some states do not allow limitations an implied warrantee lasts, and/or do not allow the exclusion or limitations of incidental or consequential
damages, so the above limitations may not apply to you. This warrantee is not enforceable outside of North America. This warrantee gives you
specific legal rights, and you may also have other rights, which vary from state to state.
For International Customers (Outside of the United States):
If the product is purchased inside of the United States and taken to another country, it is the responsibility of the product owner to cover all
shipping, customs, and duty if a warranty, upgrades, and repair issue is necessary. All provisions of the warranty above apply except for
Shipping and all costs related to shipping. Ie.. Customs charges and V.A.T. are not covered by AMT. All outside charges associated with re-
entry of the product into the USA is the sole responsibility of the product owner. At no time shall a distributor or a dealer take it upon himself
or herself to replace a defective system with a new system. This can only be done with the permission of AMT's tech support (973-222-1865)
directly or through a distributor of the country purchased with AMT tech support approval.
Repairs:
1) The customer, dealer, or distributor should contact AMT tech support via phone (973-222-1865 E.S.T. 12pm - 12am) or email with a short
description of the problem.
2) If out of warranty, we then advise the customer to call by phone to our tech support 1-973-222-1865 for a return authorization and to discuss
possible solutions before sending.
3) Date and origin of purchase required for warranty repair. If the product is covered under warranty, the product must ship back to AMT,
when completed, AMT will ship it back with the distributor's next order.
1
AMT Tech Support
104 Hillside Road
Sparta, NJ 07871
Ph: 973-222-1865

Advertisement

loading

Summary of Contents for AMT TA2 Series

  • Page 1 USA is the sole responsibility of the product owner. At no time shall a distributor or a dealer take it upon himself or herself to replace a defective system with a new system. This can only be done with the permission of AMT’s tech support (973-222-1865) directly or through a distributor of the country purchased with AMT tech support approval.
  • Page 2 Ongoing changes to improve performance are introduced whenever advances in technology and research permit. Our goal is to ensure every AMT microphone is at the forefront of current design standards when it leaves our facility. Keeping the mic clean by wiping with a damp rag on the clip and the rubber parts.
  • Page 3 INSTRUCTIONS for Hardwired Microphone system series Z1, LS, WS, VS Belt packs. The "TA2" Series: Used with, TA-2 Microphones. Most instruments have sound emanating out of more than one spot, the soprano saxophone being no exception; that is why we use more than one microphone on one instrument: one over the keys, the second over the armature.
  • Page 4: Troubleshooting

    Troubleshooting: Problems: Solutions: For Technical Support: Microphone Not Working: Monday through Friday between the No battery hours of 12:00 noon - 9:00 P.M. - Battery dead Eastern Standard Time, 9:00 am - Mic not plugged in all the way 6:00 P.M. Pacific Standard Time Bad wire from belt pack to PA or amplifier Wrong setting on the belt pack or PA EPROM installed incorrectly in belt pack.
  • Page 5 See instructions Studio preamps. Instructions AMT 97C & 97-4C Included in the AMT A97-4C set is 4 drum / percussion microphones with 4 “Inline” preamps. Phantom power required for use of “Inline Preamps”. Use the A97 with:...
  • Page 6: Ground Lift Switch

    AMT “W”ireless Series Microphone Instructions The AMT “W”ireless Microphone Systems allows the player to directly connect an AMT with a Wi5C beltpack free wireless system and Shure or Sennheiser belt pack style transmitters / wireless systems. The “W” series comes wired directly with a 4 pin connector to connect directly to any Shure wireless belt pack or if ordered for Sennheiser, the systems come with an 1/8in cable.
  • Page 7 AMT P43S Harp Microphone System The AMT P43S Microphone is attached to a two-part clip. The clip will fit into the sound holes in the back of almost any harp. Simply turn the thumbscrew to loosen the clip, slide it over the edge of a sound hole, and tighten the thumbscrew again.
  • Page 8 Unless your amplifier has phantom power (see below), you will need to install a 9-volt battery inside the AMT Preamp box. Remove the screw that holds the cover in place, attached the battery leads to the battery, and insert the battery in the battery clip. Replace the cover. Plug the microphone cable into the preamp box.