Set Up Your Smart Mesh With Other Modems; How To Pair Your Smart Mesh To Your Modem - Spark Smart Mesh Quick Start Manual

Set up your Smart Mesh with
2
other modems (stand-alone mode)

2.1 How to pair your Smart Mesh to your modem

LED Indicator Sequence
7
Make sure your modem is connected first before
you set up your Smart Mesh.
A.
Plug your Smart Mesh into a working power
outlet next to your modem - If you don't see
a light check that the power button is ON.
B. Connect the ethernet cable from your Smart
Mesh to your modem.
C.
Wait for the light on your Smart Mesh to turn
solid BLUE.
Note: Please refer to the LED indicator
sequence diagram.
D. Disable the Wi-Fi on your current modem.
Note: Use the Wi-Fi (WLAN) button if your
modem has one, or log in to your modem's
setup page.
Your Smart Mesh is paired to your modem.