Advertisement
4RE DVR Center Console Bracket Installation Manual
NOTE: There are different manufacturers of Center consoles that have different sizes and
lengths for the bracket, ensure the manufacturer type matches the type of center console
bracket used. The following brackets fit most Center Consoles
Parts included with Bracket:
Center Console Bracket
o WGP01487 Console Faceplate Adapter, 4RE, Jotto-Troy, 2"
o WGP01439 Console Faceplate Adapter, 4RE, Jotto-Troy, 3"
(2) – 1/4"-20 Socket Head cap Screws (WGP00787-002)
(4) – 1/2" Black Sheetmetal Screws (WGP571)
o
Optional Filler Panel
Optional Riser
o
Parts needed from 4RE system (in separate box):
4RE DVR
Tools Required:
Philips Head # 2 Screwdriver
3/16 Allen Wrench
WGD00080‐001 Rev C
WGP01439-001Console Faceplate Extender, 4RE, 1"
WGP01439-002Console Faceplate Extender, 4RE, 2"
WGP01439-003Console Faceplate Extender, 4RE, 3"
WatchGuard Video ‐ Proprietary
Page 1 of 3
Advertisement
Table of Contents
Related Manuals for Watchguard WGP01487
Summary of Contents for Watchguard WGP01487
- Page 1 The following brackets fit most Center Consoles Parts included with Bracket: Center Console Bracket o WGP01487 Console Faceplate Adapter, 4RE, Jotto-Troy, 2" o WGP01439 Console Faceplate Adapter, 4RE, Jotto-Troy, 3" (2) – 1/4”-20 Socket Head cap Screws (WGP00787-002) ...
- Page 2 Optional: If there is not enough room for the cables, use a “Riser” (different sizes available) as pictured below. The “split” in the riser is placed to the bottom of the DVR. Or adjust the screws after the bracket is in place. WatchGuard Video ‐ Proprietary WGD00080‐001 Rev C Page 2 of 3...
- Page 3 DVR into the Center console. Fasten the bracket to the center console with the (4) 1/2” black sheet-metal screws using the Phillips Head #2 Screwdriver. The bracket installation is complete. WatchGuard Video ‐ Proprietary WGD00080‐001 Rev C Page 3 of 3...
Need help?
Do you have a question about the WGP01487 and is the answer not in the manual?
Questions and answers