Connecting The Webcam To Your Pc / Laptop - Philips SPC230NC/00 User Manual

EN
10
Installation
Connecting the WebCam to your PC /
laptop
6
5
3
7
1 Be sure to run the installation CD first, before connecting the
WebCam to the PC / laptop.
2 Turn on the PC / laptop.
3 Connect the USB connector of the USB cable to the USB port
of the PC / laptop.
> The WebCam will now derive its power from the PC / laptop.
4 Aim the webcam as required.
5 Push the USB cable into the cable management slot.
6 Use the clamp and the two rubber rims to attach the WebCam
to your PC monitor or laptop screen.
7 Peel off the protective foil on the rear of the microphone
(SPC230NC/00, SPC230NC/27) and attach the microphone to
the PC monitor or laptop screen.
8 Connect the microphone plug to the microphone or green
socket of the sound card.
6
5
8
3