Connecting The Webcam To Your Pc/Laptop - Philips SPC210NC/00 User Manual

EN
10
Installation
Connecting the WebCam to your PC /
laptop
General
1 Be sure to run the installation CD first, before connecting the
WebCam to the PC / laptop.
2 Turn on the PC / laptop.
3 Connect the USB connector of the USB cable to the USB port
of the PC / laptop.
> The WebCam will now derive its power from the PC / laptop.
4 Use the clamp and the two rubber rims to attach the WebCam
to your PC monitor or laptop screen or fold out the clamp and
place the camera on your desk.
SPC210NC W ebCam
4
3
5
5 Peel off the protective foil on the rear of the microphone
(SPC210NC only) and attach the microphone to the PC monitor
or laptop screen.
6 Connect the microphone plug to the microphone or green
socket of the sound card.
4
5
4
6
3